Early Access 18 Nov · Join →

Your cart is empty

Start shopping

Add order note

The DNIS V6 Six Piston Mountain Bike Brake

DNIS V6 full CNC lever with reach and BPC adjustment

DNIS V6 left / right interchangeable levers

DNIS V6 front & rear brake set – Stealth Black

DNIS V6 front & rear brake set – Glacier Silver

DNIS V6 front & rear brake set – Racing Red

DNIS V6 front & rear brake set – Ultra Violet

The DNIS V6 Six Piston Mountain Bike Brake

Name: The DNIS V6 Six Piston Mountain Bike Brake
Brand: KirbEbike
SKU: 57730645852535
Price: 258.95 EUR
Availability: InStock

Six-piston V6 hydraulic disc brake for mountain bikes! Full CNC aluminium, left/right interchangeable levers and finned heat sinks for strong, cool braking on long descents. Standard version – no motor cut-off.

€258,95

SelectedSingle Brake (Rear brake 170mm Length) / Purple

Kit:Single Brake (Rear brake 170mm Length)

Lever Color:Purple

Variant

Quantity:

Description

The DNIS V6 is a full CNC six-piston hydraulic disc brake for mountain bikes – strong, even braking that stays cool on long descents.

V6 six-piston caliper – one-piece design for powerful, instant bite.
Full CNC aluminium – light, rigid and precise.
Finned heat sink – less fade on long descents.
Left / right interchangeable levers – swap sides with no re-bleed.
Reach + BPC adjustment – set the lever to suit your hand.

Single Brake: 1 lever + 1 caliper, 170 cm rear hose.
Front & Rear Set: 100 cm front hose + 170 cm rear hose.
Brake fluid: DOT 4 / DOT 5.1

Note: Standard (non e-brake) version – it does not cut power to an e-bike motor.

WATCH

See the V6 in Action

A close look at the DNIS V6 fitted to an e-bike – the full CNC lever up front and the six-piston caliper with its finned heat sink at the back.

0:18

01

Full CNC Machined

Levers and calipers are 5-axis CNC machined from solid aluminium for a lightweight, super-rigid build and a precise, consistent feel.

5-AXIS CNC
SOLID ALUMINIUM
REACH + BPC ADJUST

Reach Adjust

Set the lever distance to fit your hand.

BPC Adjust

Fine-tune free stroke for your preferred bite point.

DNIS V6 CNC brake lever fitted to an e-bike

02

Six-Piston V6 Caliper

Three pistons per side push the pads with smooth, synchronised hydraulic force. The one-piece caliper stays rigid under load for strong, even and instant braking.

6 PISTONS
ONE-PIECE CALIPER
LINEAR BITE

03

Independent Heat Sink

Finned cooling plates pull heat away from the caliper, so your braking stays consistent on long descents and repeated hard stops.

FINNED COOLING
LESS FADE
CONSISTENT FEEL

DNIS V6 six-piston caliper with finned heat sink

04

Left / Right Interchangeable

One lever, both sides. The lever body is the same on both faces, so it fits the left or right of the bar – UK or EU style, no hose swapping, no re-bleeding.

EITHER SIDE
NO RE-BLEED
UK / EU SETUP

DNIS V6 lever fits the left or right side of the bar

05

Pick Your Colour

Purple

Red

Black

Silver

06

Choose Your Kit

Single Brake

Rear brake 170mm Length

1 lever + 1 caliper · 170 cm rear hose

Rear 170 cm

Front & Rear Set

Complete front + rear

2 levers + 2 calipers · 100 cm front + 170 cm rear hose

Front 100 cm

Rear 170 cm

Specifications

Brake type	Hydraulic disc brake
Pistons	6 (V6 one-piece caliper)
Construction	Full CNC aluminium
Levers	Left / Right Interchangeable
Lever adjustment	Reach + BPC (free stroke)
Hose length	Front 100 cm · Rear 170 cm
Brake fluid	DOT 4 / DOT 5.1

Frequently Asked Questions

Will it cut power to my e-bike motor?

No. This is the standard (non e-brake) version with no motor cut-off sensor. Keep your existing brake sensors if your e-bike needs them.

Does it come ready to fit?

Yes – the hoses come pre-fitted to the levers and calipers. Mount them, align the caliper over the rotor and bed in the pads.

Is there a warranty?

Yes – every DNIS V6 comes with a 1-year warranty.