FREE SHIPPING WORLDWIDE (SHIPS FROM CHINA PLEASE SEE OUR DELIVERY INFORMATION) Please consult a professional to make sure your conversion is fitted safely and check your local laws on ebikes for where you live in the world, do not ride ebikes on the road unless you have checked the law in your local area and country. Batteries ship separately Add Hydraulic Brake sensors which fit onto your exisiting Hydraulic brake levers https://kirbebike.com/hydraulic-brake-sensor-upgrade-for-kirbebike-kits-detail.html
Imagine these different scenarios; you need to commute but it's just that little bit too far to cycle on a regular bike and you dont want to arrive all sweaty!, or you are in a busy area and the heavy traffic congestion is getting you down. Parking a car is also an issue.
Today an ebike is a real alternative to taking the car, clean and cheap to run (virtually free actually) you no longer have to suffer the constraints of normal transport PLUS you can go pretty much ANYWHERE!
We have been working on DIY ebike builds for many years now and now we have developed this kit especially designed for FAT Bikes! Please not this does not work with bikes with a through axle, it is only for bikes with conventional bolted dropouts.
KirbEbike conversion kits include everything you need in the box to make an ebike. The powerful 1000W motor is pre-fitted to a strong fat rear wheel rim and is available in 20 x 4.0 and 26 x 4.0 inch sizes so all you have to do is remove your existing rear wheel, swap the tyre and brake disc and fit the kirbebike motor wheel to your frame, connect the controller, throttle/pedal sensor, battery and away you go.
The motor is geared to provide improved torque when compared to standard hub motors, it's completely silent and smooth due to the high quality sine wave FOC controller, speed is controlled by either the included thumb throttle or the pedal sensor or you can use both!
Top speed is dependent on bike and rider weight but 30mph is easily achievable (1000W geared motors produce a LOT of torque!)
KirbEbike kits come with a vivid colour dashboard screen (T24 TFT) which mounts on the handlebars, this shows road speed, motor and controller temperature, motor power, trip and more. No external sensors are needed as the display gets all of it's data directly from the controller itself.
7 speed freewheel is included pre fitted to the motor wheel to make installation even easier.
Recommended battery is the KirbEbike ION-PLUS 58V 17Ah, this is included with the full kit
PLEASE NOTE THIS KIT IS FOR OFF ROAD USE ONLY
Controller Full Sine Wave smart controller (programmable)
Max Current - 26A
Max Voltage 14S Lithium (58.8V fully charged)
Pedal sensor (8 Magnet) and twist throttle
T24 Colour TFT display with handlebar on/off switch and controls for settings menu etc
Motor Wheel 1000W GEARED MOTOR
Various rim sizes available
7 Speed Sprocket included